Xuron Industrial Tools - Specialty Products

Specialty Products

501 Adjustable Wire Stripper

The 501 features a thumb adjustable cam that quickly sets the tool to wire sizes between 10-26 AWG (2.588 – 0.405 mm) without the need for any additional tools. Once set, the cam retains it’s setting until reset by the user.

Model 501 also features a full by-pass shear cutter for added versatility. The ergonomic design fits comfortably in both small and large hands, Xuro-Rubber™ grips cushion hands and provide a secure grasp. Xuron’s Light-Touch™ return spring provides lively return action without excessive effort. Manufactured from a tough alloyed steel and heat treated for enhanced durability.

Micro-Pneumatics^™ Series

Micro-Pneumatic™ Series tools are the latest in advanced ergonomic design. Sized to fit readily in the operator's hand, it alleviates the fatigue and related CTDs (cumulative trauma disorders) associated with conventional wire cutter use. Easily actuated by light pressure with either the thumb or forefinger, the 590 Micro-Pneumatic™ quickly adapts to either right or left-handed use.

Designed specifically for the manufacturing environment, the overall size allows excellent maneuverability and access into restricted areas, a significant advantage with today's high density electronics packaging. It features quiet (< 60 dbA) operation and is very light in weight (6 oz.), addressing two important fatigue factors. The cutter head is treated with a glare eliminating black finish for excellent contrast with the work surface and to reduce eye strain.

The cutter head features the patented Micro-Shear® cutting action for ultra clean, ultra flush cuts. Manufactured from high carbon steel and heat treated to a Rockwell hardness of 58-59C, it exhibits exceptional durability. The 590 Micro-Pneumatic™ is rated for soft wires less than 1 mil. all the way up to 16 AWG and is suitable for cutting a variety of other materials, including plastics.

The tool's design offers quick and easy cutter head replacement. It operates from a dry, unlubricated 50 p.s.i. air line, consuming just 0.13 cubic feet of air per minute of operation.

590 Micro-Pneumatic™ Flush Cutter
590F Micro-Pneumatic™ Flush Cutter w/Lead Retainer

590LP Low-Profile Head Micro-Pneumatic™ Flush Cutter

The 590LP's relieved head and slim profile allows superior access in high density areas. Flush cuts soft wire up to 20 AWG (0.8mm).

Rover Mask^™775

Rover Mask 775 is a premium quality, latex, temporary solder resist suitable for both manual and automatic dispensing. A 10 mil coating of the non-running, thrixotropic (18,000-22,000 C.P.S.) jell dries in 3 hours at room temperature or 1 hour at 160 F. (71 C.). Once cured, Rover Mask™ 775 will not lift or separate during soldering. It is exceptionally cohesive, generally peeling off in one piece, thereby simplifying removal. Once cured, bio-degradable, non-toxic Rover Mask™ 775 can be disposed of with other common, solid wastes. It has a shelf life of one year and is suitable for use as a conformal coating.

Rover Mask 775-8, 8 oz. bottle
Rover Mask 775-1, 1 gal. bottle
Rover Mask 775-55, 55 gal. drum

Wickgun™

Wickgun™ desoldering braid dispensers combine the capabilities of desoldering braid with the convenience of a hand tool. Simple, one handed operation dispenses, positions and cuts off braid, even the smaller, hard to control sizes. The only other tool you need is your soldering iron.

Wickgun™ braid dispensers fit comfortably in your hand; rotate the thumb wheel to advance or retract the braid, squeeze the trigger to cut off the used braid. There are no plungers to push, spring loaded levers to cock or vacuum chambers to empty. You never touch the braid. You don't burn your fingers. You stay clean and solderability is enhanced since the desoldering braid is not contaminated by finger oil or other foreign matter.

Wickgun™ braid dispensers feature replaceable/interchangeable cassettes, factory loaded with 15 foot (4.6 meter) lengths of pure copper braid, impregnated with water clear flux. Cassettes are available in braid sizes 1, 2, 3 and 4 (widths - 0.035", 0.060", 0.076" and 0.110"). Both the Wickgun™ and its replacement cassettes are manufactured from static control (AS) (per DOD-HDBK-263) plastic so they may be used in conjunction with your electrostatic discharge (ESD) control program (MIL-STD-1686).

800 Series Dispensing Bottles
Self sealing design – no waste, no spills. Two ounce polyethylene bottles are matched with a 1" (2.54 cm) stainless steel capillary tube for the controlled dispensing of a wide variety of liquids, including solvents. The answer for fluxing applications without spilling, dripping or gummy residue. Each size tube has a different color hub for color coding of bottles. Needle adapter will also accept you own custom sized needles with standard luer hubs.

800 2 oz. Plastic Spout
810 2 oz. 0.010 I.D. Dispensing Tube
820 2 oz. 0.020 I.D. Dispensing Tube
840 2 oz. 0.040 I.D. Dispensing Tube